Call 877-NICOLOY (642-6569)
NiCoForm
 
 

Bellows Application Data Form

   
 

 
Industry, Application, and Function of Bellows:


Click illustration on the right to view bellows design terminology and common configurations.
Bellows Skematic
Quantities Needed:
Prototype
Production
Annual
Design Status:
New Existing Revised Existing
Bellows Ends: Left End: Right End:
Integrate Mating Components (Flanges, Fittings, Hubs)?
Yes No

If Yes, please email sketch or drawing to inform@nicoform.com

Units of Measure: Please choose one:
English Units (in, lb, °F, psi) Metric Units (mm, N, °C, Pa)
Bellows Dimensions:
I.D. (Min)

(in or mm)
O.D. (Min)

(in or mm)
Free Length

(in or mm)
Overall Length

(in or mm)
       
I.D. (Max)

(in or mm)
O.D. (Max)

(in or mm)
   
   
Maximum Design Movement:
Axial Compression
(in or mm)
Axial Extension
(in or mm)
Other Type of Movement:
Arc Bending
(degrees)
Lateral/Off-set Bending
(in or mm)
Spring Rate:
Axial

(lb/in or N/mm )
Lateral

(lb/in or N/mm )
Angular

(lb/deg or N/deg )
Tolerance

(%)
Temperature Requirements:
Max.
(°F or °C)
Min.
(°F or °C)
Fluid in Contact w/ Bellows:
Internal
External
Rigid Stop to Limit Stroke:
Extension
Yes No
Compression
Yes No
Operating Pressure:
Internal Pressure
(psi or Pa)
External Pressure
(psi or Pa)
   
Leak Test Requirements: (ATM cc-He/sec)
Life Expectancy: (Cycles)
Preferred Assembly Method:
What is nine+four?:
Additional Comments:
 
     
     
 
  *Fields, marked with (*) are required. 
*Name:
*Company:
*Phone:
*E-mail:

 
     

 
 
 
  NiCoForm, Inc. 72 Cascade Dr. Rochester, NY 14614 ITAR Registered
toll free : 877-NICOLOY (642-6569)   |   phone : 585-454-5530   |   fax : 585-454-5167   |      |   sitemap